More information:. Hyper-V Virtual Switch Overview. NIC Teaming Overview. Hope this helps. Office Office Exchange Server. Not an IT pro? Windows Server TechCenter. Sign in. United States English. Ask a question. Quick access. In the details pane for the switch, which is illustrated below, select Allow management operating system to share this network adapter.
Most of these features provide you with the ability to specify the types of packets that are allowed or blocked when sent to or from the virtual machines that are connected to the virtual switch. The following sections provide additional details. The rule specifies whether a packet is allowed or denied on the way into or out of the VM. You can specify either a local address or a remote address in Local or Remote Address , but you cannot specify both. Optionally you can use an IP address range if you provide the range prefix.
During operations, the port ACL whose rules match the incoming or outgoing packet is used to determine whether the packet is allowed or denied. For example, to configure the virtual NIC attached to a port to always use either a specific MAC address or a broadcast address, you can create rules that are similar to the following:.
In this example, Any is a wildcard. Note that ACLs are evaluated on the longest prefix that is matched. In many cases, you will want to apply the same permissions for both Inbound and Outbound traffic in the same port ACLs. For example, you want to allow both Inbound and Outbound traffic; or you want to deny both Inbound and Outbound traffic.
Because of this, there are bi-directional port ACLs. You can accomplish the same effect as the first example by using bi-directional port ACLs in the following way:.
The following commands demonstrate how you can create this configuration by using Windows PowerShell:. This is useful for blocking a particular address by using a remote address with a deny action. If you are running Windows Server or later, the tool will provide a host recommendation for you. Choose a path for the virtual machine files. Choose a volume from the dropdown list or click Browse to choose a folder using the folder picker. Choose the number of virtual processors, whether you want nested virtualization enabled, configure memory settings, network adapters, virtual hard disks and choose whether you want to install an operating system from an.
Once the virtual machine is created and appears in the virtual machine list, you can start the virtual machine. Once the virtual machine is started, you can connect to the virtual machine's console via VMConnect to install the operating system.
Open the. Since this is connecting to the virtual machine's console, you will need to enter the Hyper-V host's admin credentials. If you are connected to a cluster, you can live migrate a virtual machine to another cluster node. You can view detailed information and performance charts for a single virtual machine from the single virtual machine page.
0コメント