This is because these types of wood offer excellent weather resistance compared to other types of wood, especially compared with soft wood. Pine brickmold is still one of the most popular types of wooden brickmold available today, though it comes in various finishes. You can find it raw, also known as unfinished, whereby you will need to prime and stain or paint it yourself.
You can also buy pine brickmold ready-primed so that you just need to stain or paint it, or you can buy it ready-finished, where it can simply be installed without requiring any additional layers.
When finishing your wooden brickmold, you will need to use a latex or oil-based paint that is specifically designed for outdoor use. This will help to protect the wood from moisture and prevent warping, splitting, and rotting.
You can also find brickmold in softwood, which will be less costly to buy, but is not as durable as hardwood and so may not last as long. Vinyl, also known as PVC, is a popular modern material to use for brickmold because it is almost maintenance-free.
It will not need to be re-stained or repainted every few years like wood, and it is waterproof and therefore will not rot. It is also resistant to mildew and pest infestations. It is considered to be more durable than wood because it will not warp or split under certain weather conditions, and it can be easily wiped clean or painted to alter the look of it. However, PVC can get scratched or fade in the sun, and it is also not environmentally friendly.
This type of brickmold is designed to offer the durability of PVC, with the look of wood. It is made from a poly-fiber material that makes it incredibly strong and ensures it will stand up against harsh weather.
It has a textured finish to make it look like wood, which enables it to add character to a home, and means you can match it to your door if you have a wooden door. Composite brickmold is becoming an increasingly popular choice because it offers all of the practical benefits of vinyl, with a more attractive wood-like appearance. It is typically among the most expensive types of brickmold available, but it will last for many years, so it could be considered a good investment.
Use the puncture tool on the caulk gun to puncture the seal inside the tip of the tube of caulk. Insert the tube of caulk tip-first into the caulk gun. Apply a bead of caulk along the sill of the rough opening and around the back side of the brick molding on the door.
Rest the sill of the door on the sill in the rough opening while standing on the outside of the entrance. Hammer an 8d finish nail 3 inches below the top corner of the jamb into the hinge side of the trimmer board. Hammer a nail into the remaining two hinge locations. Slide a shim into the space between the jamb and the trimmer board on the latch side of the rough opening near the top as well as approximately 3 inches above and below the latch area of the door.
Hammer 8d finish nails through the jamb into the shims and trimming board to secure the shims in place. Screw the long screw that was provided with the door hardware into the center hole of the top hinge. This screw should penetrate the trimmer board in the rough opening and help prevent the door from sagging over time. Slide the split-jamb into the rough opening on the interior of the home. The split-jamb will finish off the rough opening on the interior.
Hammer 8d finish nails through the molding into the trimmer boards every 16 inches to secure the split-jamb in place. Fit the strike plate into the mortise in the jamb. Drive the screws through the holes in the strike plate into the jamb with a screwdriver.
Slide the latch bolt into the hole in the door and fit the handles into the bolt so that they rest flush against both sides of the door. Another advantage of PVC is that it does not rot and warp in response to moisture and heat. PVC molding is also easy to maintain.
Finally, unlike soft wood, painting is not necessary for a longer service life. PVC is not all desirable. It has its drawbacks as well. PVC is more costly than wood. Secondly, it is easily damaged or scratched when the slightest pressure is applied on it. Lastly, the PVC-sawdust released during the installation process is not environmentally friendly.
Brickmold is an essential part of your house. Its use is, however, optional. You can avoid installing brickmolds on your window altogether.
Read on to understand the difference between a brickmold and a no-brickmold door. Understanding the differences will help you decide whether you need to install a molding around your door. The decision as to whether to install a brickmold around your door is entirely up to you. After comparing its advantages against its disadvantages, look at your budget then make an informed decision.
A brickmold door will cost you more than a non-brickmold door. The exact cost of a brickmold door depends on the material used in making the brickmold. PVC costs more than wood. Another factor that will influence the cost of the door is whether you decide to use a professional or do it yourself. A qualified professional is likely to do a better job but will cost you more. In the long run, engaging the service of a professional to install a brickmold is cheaper than when you do it yourself.
As long as you have basic carpentry skills, you can install a brickmold around your door yourself. As long as the brick mold is water tight, it will work perfectly well with a storm door. A water tight material like PVC does not permeate water and therefore do not warp. A brickmold material that warps is not suitable for a storm door as it will be difficult to close properly. Softwood mold is not suitable for storm doors. Vote count: 3.
No votes so far! Be the first to rate this post. What is a Brickmold? Or Brickmould. What is the Purpose of a Brickmold on a Door? Protects the Door Against Elements of Weather. Enhanced Safety. Brick Mold Materials.
0コメント