Refer to the applicable Operation and Maintenance. Manual for standard oil drain periods and to the. July Operation and. Multi Terrain Loaders. MTL B Machine. SLK1 B Machine. Maintenance Manual for specific product information. Materials and Apr 28, Also included are explanations of safety and hazardous materials icons used within the technical manual.
Power Train. Travel Speed Forward or Reverse :. One Speed. Two Speed Option. It is important to maintain seat adjustments, use proper lubricants and replace components that become worn due to age and normal use to maximize the life of Cat Comfort Seats. Failure to adhere to Practically all Service work involves the need to drive the loader. The Operators Manual, supplied with each loader, contains safety precautions relating to driving , operating and servicing that loader.
These precautions are as applicable to the service technicians as they are to the operator and should be read, understood Part Number. Displacement Gauge Assem- bly. This is only true when you do not have the resources and tools available for when that time comes! This manual will easily pay for itself on the first oil change, spark plug change, or air filter change that you perform!
The manual includes pictures and easy to follow directions on what tools are needed and how the repair is performed. Just imagine how much you can save by doing simple repairs yourself.
Many people buy this manual just to have it around for when the inevitable happens. Remove piston 31 and O-ring seal Repeat for the remaining pistons. Use Tooling A in order to remove bearing cone 42 from shaft Copyright - Caterpillar Inc. Raise the temperature of bearing cone Install bearing cone 42 onto shaft Pack bearing 42 with Tooling A. Support shaft assembly 35 , as shown. Install the housing onto shaft assembly 35 , as shown.
Install bearing cone 36 over shaft assembly Use Tooling B and a suitable press in order to install bearing cone 36 onto shaft assembly Use the suitable press in order to maintain preload on bearing cone Measure the distance X between the face of bearing cone 36 and the face of the groove for the retainers.
Select a shim that is between 0. Install O-ring seal 30 onto piston 31 and install piston Install roller
0コメント