I delete some files from it but they are back into File Explorer later. I have tried several times but the same outcome. Then I attempted to format it on the computer but failed, too. Windows cannot complete the format since the disk is write-protected. So any advice for this issue? Generally speaking, write protection also called read only is the ability of a data storage device to prevent new data from being written or old information from being modified.
Thereby, when the SD card is write-protected, you will be unable to format it successfully in traditional ways. The following methods are proven to be effective, so you can have a try. Diskpart is a Windows built-in command-line tool letting you manage your disk.
Step 3. Type the command lines below and press Enter after each line to clear write protection on the micro SD card. You need to connect the SD card to computer beforehand. By doing so, the SD card should not be write-protected any longer. Click to tweet. Check: Backup and Restore Registry. Related: Fix SD card not showing up. And click StorageDevicePolicies folder. Step 4. Then double-click WriteProtect key in the right window and set is value data as 0 and click OK.
Step 5. Close Registry Editor window and restart your computer to make these changes take effect. My SD card is write-protected, but not locked". I tried to format my SD card but failed. It says the SD card is writed-protected, and it is not locked. Is there any method to solve this problem? Write protection is a way of preventing modification and deletion of important data on a storage device.
So when your SD card is write-protected, it means the SD card is read-only, and you cannot modify, add or erase any data on your SD card. Most SD cards have a write protection lock on the left side. You can slide it down to lock an SD card for protecting the data from being modified. But not all write protection is triggered by the lock. Sometimes, you may be told your SD is under write protection, while the lock is switched off.
So how to change your files in this condition? There are graphical-based solutions to help you remove write-protection from your hard drives, USB drives, and even SD cards. EaseUS CleanGenius is one of these tools that helps you fix aforementioned issues on your drives without knowing a thing about command-line.
There are many ways to remove write protection from USB drives in Windows. One popular method is to edit the Registry. Here are the steps to remove write protection from a USB drive.
Before you start, connect your write-protected USB drive to your computer. Navigate to the following location to look for a key named WriteProtect:.
Step 3. If this key exists, right-click it to select "Modify" to change the value from 1 to 0. After you have tried the 6 solutions above, you may have fixed the "the disk is write-protected" error.
To avoid this situation and make your external devices work well, you can format them. If you fail to solve your problem, you can try to format the device to solve your case. Follow the steps below to format your USB drive now. Connect the USB drive or pen drive to your computer. Download and launch EaseUS partition software. Right-click the USB drive you intend to format and choose "Format". Click "OK" if you see the Warning window.
If you have important data on it, back up the data in advance. If you lost data after formatting , you can run EaseUS data recovery software. No matter how you lost your data, you can always get back files with simple steps. Hopefully, we've found your solutions. Any one of the solutions above can solve the "the disk is write-protected" error effectively.
It is time for you to try the solutions above so you can start accessing and changing the data on your storage device.
0コメント